Description

DOOSAN SCR/DPF/DEF EMULATOR WITH SCANIA ENGINE

Olny for ECU EMD1 / EME1  for ECU S8 is another device

The device is made of high quality components and it is produced in EUROPE.

Each device is tested and subjected to quality control before being dispatched to client

Profesionall solution to Remove/Off SCR / DPF on Dossan Crawler Excavators with Scania DC09 and DC13  Engines.

Most important features:

• Emulation of whole SCR / DEF / DPF system
• Fully water resistant 
• Produced from industrial components

Emulated Components of SCR / DEF / DPF system:

• NOx Sensor Downstream
• NOx Senosr Upstream
• Combined Temerature Sensor
• Quality / Level Sensor
• EEC ECU

Doosan Models compatibile:

Crawler Excavators:

• DX380LC-5
• DX420LC-5
• DX490LC-5
• DX530LC-5

 Articulated Dump Trucks:

• DA30-5
• DA40

Wheel Loaders:

• DL420-5
• DL420CVT-5
• DL450-5
• DL550-5
• DL580-5

The set includes:

• DOOSAN SCR / DEF / DPF Emulator – 1pcs.
• Installation Manual

We connect the emulator to the EEC (SCR) control unit using the upper pink connector according to the following scheme.

1. The black wire from the emulator is connected to pin 4 on the EEC.
2. The green (or blue) wire from the emulator is connected to pin 22 on the EEC.
3. The yellow (or brown) wire from the emulator is connected to pin 19 on the EEC.
4. Additionally, the wire running to pin 12 on the EEC must be cut, and the end of the wire going towards the installation should be connected to the red wire from the emulator (or gray)

2 YEAR WARRANTY

If you are looking for model not listed here and on other list on this shop, please contact us directly on info@bt24h.com with your model number. We will check for compability.